5’ 30amp 3 wire dryer cord WX09X10003

Description

5’ 30Amp 3 Wire Dryer Cord WX09X10003 (GE 3-Prong Dryer Power Cord, 5 ft)

The GE WX09X10003 is a 5’ 30amp 3 wire dryer cord WX09X10003 engineered for
3-prong dryer outlets and standard 30A electric dryer hookups.
Because many properties still use legacy 3-wire receptacles, this cord is a practical solution for
replacement installs in older homes, multi-unit turns, and service workflows where a dedicated ground conductor is not present at the outlet.

In addition, this 5 ft 30amp 3 wire dryer cord WX09X10003 uses a molded, space-saving right-angle plug
that helps keep the cord close to the wall. As a result, the dryer can sit more neatly in tighter laundry closets.
Moreover, the cord includes pre-attached ring terminals for faster terminal block connections, and it also includes a
strain relief clamp (cord clamp) to reduce stress on terminals for safer, more stable installs over time.

For inventory planning, this product fits naturally into appliance distributors in USA (B2B Appliance Distributors USA) stocking programs and
B2B appliance distributors USA assortments, since it is a high-velocity accessory SKU that supports repeat demand.
Likewise, if you are learning how to become an appliance parts distributor, cords like WX09X10003 can be a strong early-category focus:
they have clear specs, consistent reorder behavior, and straightforward pick/pack processes.
Finally, if you are mapping your catalog structure, the keyword-friendly page label
5-30amp-3-wire-dryer-cord makes this item easier to group with related install accessories.

---

5’ 30Amp 3 Wire Dryer Cord WX09X10003 Quick Summary

• Product: 5′ 30Amp 3 Wire Dryer Cord
• OEM Part Number: WX09X10003
• Primary Keyword: 5’ 30amp 3 wire dryer cord WX09X10003
• Secondary Keyword: 5 ft 30amp 3 wire dryer cord WX09X10003
• Catalog/Slug Keyword: 5-30amp-3-wire-dryer-cord
• Length: 5 ft
• Amperage: 30 Amps
• Configuration: 3-wire (3-prong plug)
• Plug Type: Molded right-angle 3-prong (space-saving)
• Wire Gauge / Listing: UL-listed, 10-gauge (as listed)
• Color: Gray (as listed)
• Included Components: Ring terminals, strain relief clamp (cord clamp)
• Compatibility: Fits most major electric dryer brands using a 3-prong, 30A setup (commonly used with GE, Kenmore, RCA, and others where applicable)

---

Why B2B Buyers Stock WX09X10003

If you manage service teams, property maintenance schedules, or a warehouse line card, then a 3-wire dryer cord is often a steady mover.
Specifically, the 5’ 30amp 3 wire dryer cord WX09X10003 is commonly selected when the install location uses a 3-prong outlet.
Therefore, it can help avoid delayed installs caused by mismatched cord configurations.
Additionally, the right-angle plug reduces clearance issues, while the ring terminals reduce install time.
Consequently, B2B programs often treat this as a “core” accessory SKU.

• Faster field installs: Ring terminals speed up terminal block connections, and the cord clamp supports safer routing.
• Lower call-back risk: Strain relief reduces pull on terminals; likewise, cleaner routing reduces accidental tension.
• Clear reorder logic: Techs and buyers can simply reorder by WX09X10003.
• Inventory efficiency: High-velocity accessory demand supports stable stocking for appliance distributors in USA.
• Wholesale-ready: Practical for B2B appliance distributors USA bundles and install kits.

---

5’ 30Amp 3 Wire Dryer Cord WX09X10003 Key Features & Benefits

1) Right-Angle Plug For Close-To-Wall Installation

The molded-on right-angle plug keeps the cord close to the wall. As a result, it helps reduce sharp bends behind the dryer.
Additionally, it can improve fit in tight laundry closets and stacked configurations, which is helpful during replacements and service access.

2) 3-Wire Configuration For 3-Prong Outlets

This 3-wire configuration is intended for installations where the outlet is a 3-prong, 30A receptacle.
However, because code and outlet types can vary by region and property age, always verify that a 3-wire connection is permitted and appropriate for the site.

3) Ring Terminals For Secure Hook-Up

Ring terminals allow for a cleaner, more secure terminal block connection. Therefore, technicians can tighten connections consistently and reduce the chance of loosening over time.

4) Strain Relief Clamp Included

The included clamp must be used so the cord does not pull on the terminals. Consequently, it helps protect the terminal block connection from vibration and movement during use.

---

Compatibility Notes

The 5 ft 30amp 3 wire dryer cord WX09X10003 is designed for most electric dryers that use a 3-prong, 30A power connection.
In mixed-brand service environments, it is often used on GE, Kenmore, RCA, and other compatible models where a 3-wire terminal block configuration applies.
Nevertheless, confirm the following before dispatching a technician or shipping bulk orders:

• The wall receptacle is a 3-prong dryer outlet.
• The dryer terminal block supports a 3-wire configuration.
• The installation layout benefits from a right-angle plug (tight clearance behind dryer).
• A 5 ft length is sufficient for routing and strain relief placement.

If the location requires a 4-wire configuration (common in newer construction), then a 3-wire cord will not be the correct choice.
Therefore, a quick pre-check of outlet type can prevent refused installs and rescheduled jobs.

---

Installation and Usage (Best-Practice Checklist)

For safety, installation should be completed by a qualified technician or in accordance with manufacturer instructions and local electrical guidance.
Use the checklist below to reduce avoidable mistakes:

1. Safety first: Unplug the dryer and turn off the breaker before starting.
2. Confirm outlet type: Verify the outlet is 3-prong and matches the plug.
3. Open the dryer terminal block access panel.
4. Route the cord through the opening and install the strain relief clamp before making connections.
5. Attach the ring terminals to the correct terminal block points (follow the dryer wiring diagram).
6. Tighten connections securely and confirm conductors are seated correctly.
7. Reinstall the terminal block cover and confirm the clamp is tight and strain is relieved.
8. Restore power and test dryer operation safely.

For B2B programs, you can also include a “pre-install check” on the work order. For example: outlet type, required cord type, and clearance check.
As a result, teams reduce delays and improve first-visit completion rates.

---

Specifications

• OEM Part Number: WX09X10003
• Length: 5 ft
• Amperage: 30 Amps
• Configuration: 3-wire (3-prong)
• Plug Type: Molded-on right-angle plug
• Included: Ring terminals, strain relief clamp
• Wire Gauge / Listing: UL-listed, 10-gauge (as listed)
• Color: Gray (as listed)

Weights & Dimensions (As Listed)

• Overall Depth: 62 in
• Overall Height: 1.75 in
• Overall Width: 2.25 in
• Approximate Shipping Weight: 1040 lb (as listed)

Note: Some published weight/dimension fields in third-party catalogs can contain formatting or unit issues. Therefore, for procurement decisions, prioritize the electrical and fitment specs (length, amperage, wire count, plug type) and confirm model fit where needed.

---

Where This Fits in Wholesale & Distribution Programs

In accessory assortments, dryer cords typically behave like high-velocity items: they are easy to identify, frequently needed, and often purchased in bulk.
Therefore, appliance distributors in USA and B2B appliance distributors USA programs often position the
5’ 30amp 3 wire dryer cord WX09X10003 near venting and clamp accessories so pick/pack remains fast and consistent.
Additionally, because the right-angle plug helps with close-to-wall installs, it can reduce service friction in compact laundry spaces.

If you are exploring how to become an appliance parts distributor, consider building a starter set around install accessories:
cords (3-wire and 4-wire), venting, clamps, strain relief parts, and other “install day” essentials.
As a result, you can build repeat ordering behavior first and then expand into model-specific mechanical replacement parts later.

Related Options, Bundles, and Safety References

If you are ordering the 5’ 30Amp 3 Wire Dryer Cord WX09X10003 for legacy 3-prong installs, it often helps to
cross-check outlet type and code requirements before dispatching a technician. For example, many newer homes require a
4-wire configuration, so you may want to keep a 4-prong option on hand for faster first-visit completion. Compare our
4 Ft 30Amp 4 Wire Dryer Cord WX09X10018
for close-clearance installs, or step up to the longer
5 Ft 30Amp 4 Wire Dryer Cord WX09X10019
when routing distance is tighter and you need extra reach. Likewise, if you are stocking by brand-mapped SKUs for older properties,
you can also review the
4 Ft 30Amp 3 Wire Dryer Cord WX09X10002 (GE)
to support shorter 3-wire layouts and reduce inventory gaps.

Additionally, many service teams bundle cords with “install-day” accessories to reduce delays, so if your dryer is steam-capable,
consider pairing with the
Steam Dryer Installation Kit Stainless Steel 5304495002
to standardize hookups and minimize follow-up visits. Finally, if your procurement team also builds appliance install bundles across categories,
the
Dishwasher Installation Kit With Elbow DWK6572SSE (72″ Stainless)
is a practical add-on SKU for distributor programs that want fewer missing-part call-backs.

For safety and compliance guidance, reference official resources such as the
NFPA 70 (National Electrical Code) overview,
general consumer safety information from the
U.S. Consumer Product Safety Commission (CPSC),
and practical usage and efficiency guidance from the
U.S. Department of Energy (Laundry & Dryer tips).
As always, confirm outlet type and local requirements to ensure the correct cord configuration is selected for the site.