Description
GE Washer Inverter Control Board WH22X35837 Genuine Replacement Part
The Washer Inverter Control Board WH22X35837 is a genuine GE replacement part designed for compatible front load washing machine models. This inverter or motor control board plays an important role in washer operation, especially during spin functions. Therefore, if your GE front load washing machine runs but does not spin, this is often the replacement part needed to resolve the issue.
If you are searching for parts home appliances, support from an appliances warehouse, or components for washer repair, this board is one of the key electronic parts to review when diagnosing a non-spinning GE washer.
Washer Inverter Control Board WH22X35837 Product Overview
This is the inverter and motor control board for many GE washing machines. In particular, it is commonly used when the machine operates normally in other ways but shows an inverter control board error and fails to spin. In those cases, replacing this board may restore normal washer performance.
However, some common failures on these GE front load washer platforms may also involve the main control board or the drain pump. Because of that, technicians sometimes inspect those related components as part of the overall repair process. Even so, if the machine runs and only reports an inverter control board issue that prevents spinning, this may be the only component that needs replacement.
What This Part Does
The Washer Inverter Control Board WH22X35837 helps manage motor-related washer functions. As a result, it plays a central role in the spin cycle and other operating behavior tied to washer motor control. When this board fails, the washer may power on and appear to operate normally but still fail to spin properly.
For service technicians working on washing machine systems, this part is often a practical solution for targeted washer repair when the symptom clearly points to inverter control failure.
Part Number and Replacement Information
Part Number WH22X38837 replaces the following part numbers:
- WH22X35837
- WH22X32059
- WH22X32957
- WH22X34657
In addition, the product title and listing also reference GE WH22X35837 Washer Inverter Control Board and note compatibility with earlier replacement numbers. Therefore, buyers should verify the model number and part reference before ordering.
Washer Inverter Control Board WH22X35837 Compatible Models
This washer inverter control board fits the following models:
- GFW510S
- GFW550S
- GFW650S
- GFW850S
- PFW870S
- PFW950S
Because washer configurations can vary by series and revision, users should always confirm compatibility with the exact appliance model before purchase or installation.
Common Symptoms This Part May Help Fix
- Washing machine will not spin
- Washer shows inverter control board error
- Machine runs but spin cycle does not complete correctly
- Motor-related control failure in compatible GE front load washers
Consequently, if the washer operates but does not spin and diagnostics point to the inverter board, this part may resolve the issue.
Washer Inverter Control Board WH22X35837 Technical Details
| Brand Name | GE |
|---|---|
| Model Info | WH22X35837 |
| Item Weight | 15.5 ounces |
| Product Dimensions | 1 x 1 x 1 inches |
| Item Model Number | WH22X35837 |
| Part Number | WH22X35837 |
| Included Components | Single GE WH22X35837 Washer Inverter Control Board |
| Batteries Included | No |
| Batteries Required | No |
What’s in the Box
- Single GE WH22X35837 Washer Inverter Control Board
Brand and Marketplace Notes
GE is identified as a top brand in this product listing. In addition, the listing notes that many customers rate items from this brand highly, order volume has been strong in recent months, and return rates are generally low. These points may be useful for buyers comparing OEM laundry components through an appliances warehouse or distributor catalog.
Why Choose a Genuine GE Washer Inverter Control Board
Choosing a genuine GE replacement part helps support correct fit, more predictable performance, and better compatibility with the washer platform. In contrast, non-OEM electronic boards may introduce fitment issues or inconsistent function. Therefore, technicians sourcing parts home appliances often prefer OEM boards for accurate washer repair.
Because the inverter board directly affects washer motor behavior, correct replacement is especially important. As a result, many service teams verify both the model number and the board number before installation.
Installation Notes
Before replacing the inverter control board, disconnect power to the washer and follow the service procedure for the exact model. Next, access the board location, remove the original part carefully, reconnect the wiring to the replacement board, and reinstall the necessary panels. Finally, restore power and verify washer operation.
If the machine still does not spin after replacement, technicians may also inspect related components such as the main control board or drain pump, especially on washer platforms where those failures can occur together.
Shipping Information
This product includes free standard shipping according to the product description.
Important Compatibility Note
Please verify the appliance model number before ordering. Even when washer control boards look similar, connector layouts and platform revisions may differ. Therefore, always confirm that the Washer Inverter Control Board WH22X35837 is the correct replacement for your washer before purchase or installation.
Related Search Terms
Washer Inverter Control Board WH22X35837, washing machine, parts home appliances, appliances warehouse, washer repair
Related Appliance Parts and Equipment
If you are performing washer repair or sourcing parts home appliances for service inventory, you may also want to review additional appliance components and equipment available in our catalog. These products are commonly used by appliance repair technicians, maintenance companies, and appliance parts distributors.
Related Appliance Control Boards
- Refrigerator Main Control Board WR55X10996C – GE Refrigerator Electronic Control Board
- Refrigerator Main Control Board Assembly WR55X10942 – Genuine GE Replacement Control Board
- Refrigerator Main Control Board WR55X10956 – OEM Refrigerator Electronic Control Board
Related Laundry Appliances
- Frigidaire Washer FLVW7523BW – 4.4 Cu. Ft. Top Load Washing Machine
- Frigidaire FLCE7522AW Washer Dryer Laundry Center – Washer and Dryer Combo
External Appliance Resources
For additional technical documentation, washer troubleshooting guidance, and appliance maintenance information, you may also review the following external resources:





Michael Turner (verified owner) –
We installed several WH22X35837 inverter boards in GE front load washing machines for office laundry rooms. Spin cycle returned to normal immediately.
David Kim (verified owner) –
This Washer Inverter Control Board WH22X35837 solved a no-spin issue in multiple machines we service. Genuine part and perfect compatibility.
Anthony Rivera (verified owner) –
Our technicians regularly install this inverter board during washer repair calls. Installation is straightforward and performance is stable.
Jason Patel (verified owner) –
We maintain laundry equipment for hotels and keep WH22X35837 boards in stock. Reliable solution for spin control problems.
Brian Carter (verified owner) –
This board restored spin functionality in a GE washing machine that previously stopped mid-cycle. Replacement took less than an hour.
Robert Green (verified owner) –
As appliance parts dealers we supply WH22X35837 inverter boards to multiple repair companies. Technicians consistently request this part.
Christopher Young (verified owner) –
Installed this board in a washer with motor control error codes. After replacement the machine completed full spin cycles normally.
Steven Brooks (verified owner) –
Our repair team frequently installs WH22X35837 boards for GE front load washers. OEM quality and dependable performance.
Alex Morgan (verified owner) –
We replaced several inverter boards in facility laundry machines. Installation was quick and washer operation stabilized.
Victor Hansen (verified owner) –
This inverter board solved repeated spin failures in one of our client laundry units. Reliable OEM component.
Tom (verified owner) –
Washer inverter control board installed smoothly, machine runs like new.
Thomas Nguyen (verified owner) –
WH22X35837 is one of the most requested inverter boards for GE washers in our repair network. Easy installation and stable motor control.
Rachel Cooper (verified owner) –
Solid replacement part overall. After installing the inverter control board the washer spin cycle worked normally again.
Marina Petrova (verified owner) –
As a distributor we supply WH22X35837 boards to appliance service companies. Demand remains steady for washer repairs.
Elena (verified owner) –
Reliable part, strong feedback from clients.
Eric Morales (verified owner) –
This board restored proper spin speed and motor control in a commercial laundry washer. Works exactly as expected.
Liam Walker (verified owner) –
Technicians frequently request WH22X35837 for GE washer repairs. Reliable OEM inverter control board.